POOSHESH STEELPERGAS

UNS C17500 (CW104C) Cobalt-Beryllium Copper

فولاد آلیاژی

TD04 (solution heat treated and cold worked to full-hard)

خلاصه مشخصات

چگالی8.9g/cm³
مدول الاستیسیته120GPa
استحکام کششی520MPa
استحکام تسلیم470MPa
سختی برینلناموجود
حداکثر دمای کاری220°C
محاسبه وزن

ترکیب شیمیایی

C
CuCo2Be ( CW104C ) Low alloyed copper alloy Chemical composition. Equivalents of CuCo2Be ( CW104C ). Standards.1 Mechanical Properties. Hardness%
SI
0 to 0.2%
CU
95.6 to 97.2%
AL
0 to 0.2%
CO
2.4 to 2.7%
BE
0.4 to 0.7%
RES.
Residuals res. | | 0 to 0.5%
RESIDUALS RES.
0 to 0.5%
FE
0 to 0.1%

خواص مکانیکی

مدول الاستیسیته (یانگ)
120 GPa
ازدیاد طول در شکست
6.0 %
استحکام خستگی
210 MPa
ضریب پواسون
0.34
مدول برشی
45 GPa
استحکام برشی
300 MPa
استحکام کششی نهایی UTS
520 MPa
استحکام تسلیم / تنش اثبات
470 MPa

سختی

سختی راکول B
77

خواص فیزیکی

چگالی
8.9 g/cm 3

خواص حرارتی

گرمای نهان ذوب
220 J/g
حداکثر دمای کاری مکانیکی
220 °C
دمای لیکوئیدوس
1060 °C
دمای سالیدوس
1020 °C
ظرفیت گرمایی ویژه
390 J/kg-K
هدایت حرارتی
200 W/m-K
پخشایی حرارتی
59 mm 2 /s
انبساط حرارتی
18 µm/m-K
مقاومت به شوک حرارتی
18 points

خواص الکتریکی

هدایت الکتریکی حجمی
24 % IACS
هدایت الکتریکی ویژه
24 % IACS

خواص محاسباتی

انرژی گسیختگی حجمی
30 MJ/m 3
مدول تاب‌آوری
910 kJ/m 3
نسبت سختی محوری به وزن
7.5 points
نسبت سختی خمشی به وزن
18 points
نسبت استحکام محوری به وزن
16 points
نسبت استحکام خمشی به وزن
16 points

خواص محیطی

قیمت پایه فلز
60 % relative
کربن نهفته
4.7 kg CO 2 /kg material
انرژی نهفته
73 MJ/kg
انرژی نهفته
73 MJ/kg 31 x 10 3 BTU/lb
آب نهفته
320 L/kg
آب نهفته
320 L/kg 38 gal/lb
نام‌ها و معادل‌های ثبت‌شده
C17500CW104CCW104CCuCo2BeUNS C17500 (CW104C) Cobalt-Beryllium Copper
استانداردها

ASTM B441 ASTM B441: Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

ASTM B441 ASTM B441: Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465) Copper: Its Trade, Manufacture, Use, and Environmental Status, Gunter Joseph, 2001 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993

EN 12163 EN 12163: 1998 Copper and copper alloys. Rod for general purposes

EN 12165 EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock

EN 12166 EN 12166: 1998 Copper and copper alloys. Wire for general purposes

EN 12167 EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes

EN 12420 EN 12420: 1999 Copper and copper alloys. Forgings

EN 13148 EN 13148: 2001 Copper and copper alloys. Hot-dip tinned strip

EN 1652 EN 1652: 1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes

EN 1654 EN 1654: 1998 Copper and copper alloys. Strip for springs and connectors