ENAW-AlMg1(B)
آلومینیوم کارشده
خلاصه مشخصات
چگالی2.69g/cm³
مدول الاستیسیتهناموجود
استحکام کششی100MPa
استحکام تسلیم40MPa
سختی برینل30HB
حداکثر دمای کاریناموجود
ترکیب شیمیایی
B
ENAW-AlMg1(B) ( ENAW-5005 ) Aluminium - 5000 series ( Magnesium Mg is major alloying element ) Chemical composition. Equivalents of ENAW-AlMg1(B) ( ENAW-5005 ). Standards.1 Mechanical Properties. Hardness%
خواص مکانیکی
حداقل ازدیاد طول A، Lo = 50mm (%) (F) (H112)
16
حداقل ازدیاد طول A، Lo = 50mm (%) (H18)
1-2
حداقل ازدیاد طول A، Lo = 50mm (%) (O) (H111)
16-18
حداقل ازدیاد طول در شکست A (%) (F) (H112)
18
حداقل ازدیاد طول در شکست A (%) (O) (H111)
18-20
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (F) (H112)
40
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (H18)
165
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (O) (H111)
40
استحکام کششی Rm (MPa) (F) (H112)
100
استحکام کششی Rm (MPa) (H18)
185
استحکام کششی Rm (MPa) (O) (H111)
100-150
سختی
سختی برینل HBW (F) (H112)
30
سختی برینل HBW (O) (H111)
30
سایر خواص
کد وضعیت F
Fabricated (as cast)
کد وضعیت H
Strain hardened
کد وضعیت T
Thermally treated to produce stable tempers other than F, O or H
کد وضعیت T1
Cooled from an elevated temperature shaping process and naturally aged
کد وضعیت T2
Cooled from an elevated temperature shaping process, cold worked and naturally aged
کد وضعیت T3
Solution heat treated, cold worked and naturally aged
کد وضعیت T4
Solution heat treated and naturally aged
کد وضعیت T5
Cooled from an elevated temperature shaping process and then artificially aged
کد وضعیت T6
Solution heat treated and then artificially aged
کد وضعیت T7
Solution heat treated and then artificially overaged (stabilised)
کد وضعیت T8
Solution heat treated, cold worked and then artificially aged
کد وضعیت T9
Solution heat treated, artificially aged and then cold worked
کد وضعیت W
Solution heat treated (unstable temper)
نامها و معادلهای ثبتشده
ENAW-5005ENAW-AlMg1(B)
استانداردها
EN 12392 EN 12392: 2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
EN 1396 EN 1396: 2007 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
EN 1592-2 EN 1592-2: 1998 Aluminium and aluminium alloys. HF seam welded tubes. Mechanical properties
EN 485-2 EN 485-2: 2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 573-3 EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 683-2 EN 683-2: 2006 Aluminium and aluminium alloys. Finstock. Mechanical properties
EN 754-2 EN 754-2: 2008 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
EN 755-2 EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
EN 851 EN 851: 1996 Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
EN 941 EN 941: 1996 Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications