ENAW-AlSi1Fe
آلومینیوم کارشده
خلاصه مشخصات
چگالی-g/cm³
مدول الاستیسیتهناموجود
استحکام کششی120-160MPa
استحکام تسلیم90MPa
سختی برینل38HB
حداکثر دمای کاریناموجود
ترکیب شیمیایی
FE
ENAW-AlSi1Fe ( ENAW-4006 ) Aluminium - 4000 series ( Silicon Si is major alloying element) Chemical composition. Equivalents of ENAW-AlSi1Fe ( ENAW-4006 ). Standards.1 Mechanical Properties. Hardness%
خواص مکانیکی
حداقل ازدیاد طول A، Lo = 50mm (%) (H12)
4-5
حداقل ازدیاد طول A، Lo = 50mm (%) (H14)
3
حداقل ازدیاد طول A، Lo = 50mm (%) (O)
17-25
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (H12)
90
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (H14)
120
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (O)
40
استحکام کششی Rm (MPa) (H12)
120-160
استحکام کششی Rm (MPa) (H14)
140-180
استحکام کششی Rm (MPa) (O)
95-130
سختی
سختی برینل HBW (H12)
38
سختی برینل HBW (H14)
45
سختی برینل HBW (O)
28
سایر خواص
کد وضعیت F
Fabricated (as cast)
کد وضعیت H
Strain hardened
کد وضعیت O
Annealed
کد وضعیت T
Thermally treated to produce stable tempers other than F, O or H
کد وضعیت T1
Cooled from an elevated temperature shaping process and naturally aged
کد وضعیت T2
Cooled from an elevated temperature shaping process, cold worked and naturally aged
کد وضعیت T3
Solution heat treated, cold worked and naturally aged
کد وضعیت T4
Solution heat treated and naturally aged
کد وضعیت T5
Cooled from an elevated temperature shaping process and then artificially aged
کد وضعیت T6
Solution heat treated and then artificially aged
کد وضعیت T7
Solution heat treated and then artificially overaged (stabilised)
کد وضعیت T8
Solution heat treated, cold worked and then artificially aged
کد وضعیت T9
Solution heat treated, artificially aged and then cold worked
کد وضعیت W
Solution heat treated (unstable temper)
نامها و معادلهای ثبتشده
ENAW-4006ENAW-AlSi1Fe
استانداردها
EN 485-2 EN 485-2: 2008 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 573-3 EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 851 EN 851: 1996 Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
EN 941 EN 941: 1996 Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications