ENAW-AlCu6BiPb(A)
آلومینیوم کارشده
خلاصه مشخصات
چگالی-g/cm³
مدول الاستیسیتهناموجود
استحکام کششی275MPa
استحکام تسلیم125MPa
سختی برینل95HB
حداکثر دمای کاریناموجود
ترکیب شیمیایی
خواص مکانیکی
حداقل ازدیاد طول A، Lo = 50mm (%) (T4)
12
حداقل ازدیاد طول A، Lo = 50mm (%) (T6)
4-6
حداقل ازدیاد طول در شکست A (%) (T4)
14
حداقل ازدیاد طول در شکست A (%) (T6)
6-8
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (T4)
125
تنش اثبات ۰٫۲٪ Rp0.2 (MPa) (T6)
195-230
استحکام کششی Rm (MPa) (T4)
275
استحکام کششی Rm (MPa) (T6)
295-310
سختی
سختی برینل HBW (T4)
95
سختی برینل HBW (T6)
110
سایر خواص
کد وضعیت F
Fabricated (as cast)
کد وضعیت H
Strain hardened
کد وضعیت O
Annealed
کد وضعیت T
Thermally treated to produce stable tempers other than F, O or H
کد وضعیت T1
Cooled from an elevated temperature shaping process and naturally aged
کد وضعیت T2
Cooled from an elevated temperature shaping process, cold worked and naturally aged
کد وضعیت T3
Solution heat treated, cold worked and naturally aged
کد وضعیت T4
Solution heat treated and naturally aged
کد وضعیت T5
Cooled from an elevated temperature shaping process and then artificially aged
کد وضعیت T6
Solution heat treated and then artificially aged
کد وضعیت T7
Solution heat treated and then artificially overaged (stabilised)
کد وضعیت T8
Solution heat treated, cold worked and then artificially aged
کد وضعیت T9
Solution heat treated, artificially aged and then cold worked
کد وضعیت W
Solution heat treated (unstable temper)
نامها و معادلهای ثبتشده
ENAW-2011AENAW-AlCu6BiPb(A)
استانداردها
EN 573-3 EN 573-3: 2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 754-2 EN 754-2: 2008 Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties
EN 755-2 EN 755-2: 2008 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties