1050 (A91050) Aluminum
Wrought Aluminum Alloys
annealed
Property Overview
Density2.7g/cm³
Elastic Modulus68GPa
Tensile Strength76MPa
Yield Strength25MPa
Brinell HardnessUnknown
Maximum Service Temperature170°C
Chemical Composition
MN
0 to 0.050%
SI
0 to 0.25%
CU
0 to 0.050%
TI
0 to 0.030%
V
0 to 0.050%
AL
99.5 to 100%
MG
0 to 0.050%
ZN
0 to 0.050%
FE
0 to 0.4%
Mechanical
Elastic (Young's, Tensile) Modulus
68 GPa
Elongation at Break
37 %
Fatigue Strength
31 MPa
Poisson's Ratio
0.33
Shear Modulus
26 GPa
Shear Strength
62 MPa
Tensile Strength: Ultimate (UTS)
76 MPa
Tensile Strength: Yield (Proof)
25 MPa
Physical
Density
2.7 g/cm 3
Thermal
Latent Heat of Fusion
400 J/g
Maximum Temperature: Mechanical
170 °C
Melting Completion (Liquidus)
640 °C
Melting Onset (Solidus)
650 °C
Specific Heat Capacity
900 J/kg-K
Thermal Conductivity
230 W/m-K
Thermal Diffusivity
94 mm 2 /s
Thermal Expansion
24 µm/m-K
Thermal Shock Resistance
3.4 points
Electrical
Electrical Conductivity: Equal Volume
61 % IACS
Electrical Conductivity: Equal Weight (Specific)
200 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
22 MJ/m 3
Resilience: Unit (Modulus of Resilience)
4.6 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
50 points
Strength to Weight: Axial
7.8 points
Strength to Weight: Bending
15 points
Environmental
Base Metal Price
9.5 % relative
Embodied Carbon
8.3 kg CO 2 /kg material
Embodied Energy
160 MJ/kg
Embodied Energy
160 MJ/kg 67 x 10 3 BTU/lb
Embodied Water
1200 L/kg
Embodied Water
1200 L/kg 140 gal/lb
Physical Other
Calomel Potential
-750 mV
Registered Designations & Aliases
1050 (A91050) AluminumA91050EN AW-1050
Standards
ASTM B491 ASTM B491: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B491 ASTM B491: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications Aluminum: Properties and Physical Metallurgy, John E. Hatch (editor), 1984 Aluminum Standards and Data, Aluminum Association Inc., 2013 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties
ISO 6361-2 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties