CuCo1Ni1Be
Alloy Steels
Property Overview
Density8.8g/cm³
Elastic ModulusUnknown
Tensile Strength240MPa
Yield Strength220MPa
Brinell HardnessUnknown
Maximum Service TemperatureUnknown
Chemical Composition
C
CuCo1Ni1Be ( CW103C ) Low alloyed copper alloy Chemical composition. Equivalents of CuCo1Ni1Be ( CW103C ). Standards.1 Mechanical Properties. Hardness%
Mechanical
A - Min. elongation Lo = 50mm (%) (R240)
20
A - Min. elongation Lo = 50mm (%) (R480)
2
A - Min. elongation Lo = 50mm (%) (R650)
8
A - Min. elongation at fracture (%) (R240)
20
A - Min. elongation at fracture (%) (R480)
2
A - Min. elongation at fracture (%) (R650)
8
R p0.2 0.2% proof strength (MPa) (R240)
220
R p0.2 0.2% proof strength (MPa) (R480)
370
R p0.2 0.2% proof strength (MPa) (R650)
500
Rm - Tensile strength (MPa) (R240)
240
Rm - Tensile strength (MPa) (R480)
480
Rm - Tensile strength (MPa) (R650)
650
Hardness
Vickers hardness ( HV): (H060)
60 - 130
Vickers hardness ( HV): (H140)
140 - 180
Vickers hardness ( HV): (H200)
200 - 280
Other
H
Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements
R
Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements
Registered Designations & Aliases
CW103CCuCo1Ni1Be
Standards
EN 12163 EN 12163: 1998 Copper and copper alloys. Rod for general purposes
EN 12165 EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock
EN 12166 EN 12166: 1998 Copper and copper alloys. Wire for general purposes
EN 12167 EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes
EN 12420 EN 12420: 1999 Copper and copper alloys. Forgings
EN 1652 EN 1652: 1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes