EN 1.4150 (X53CrSiMoVN16-2) Stainless Steel
Martensitic Stainless Steels
Property Overview
Density7.6g/cm³
Elastic Modulus190GPa
Tensile Strength730MPa
Yield Strength430MPa
Brinell Hardness220HB
Maximum Service Temperature840°C
Chemical Composition
C
0.45 to 0.6%
CR
15 to 16.5%
NI
0 to 0.4%
MO
0.2 to 0.4%
MN
0 to 0.8%
SI
1.3 to 1.7%
N
0.050 to 0.2%
P
0 to 0.030%
S
0 to 0.010%
V
0.2 to 0.4%
FE
79 to 82.8%
Mechanical
Elastic (Young's, Tensile) Modulus
190 GPa
Elongation at Break
20 %
Fatigue Strength
270 MPa
Poisson's Ratio
0.28
Shear Modulus
76 GPa
Shear Strength
460 MPa
Tensile Strength: Ultimate (UTS)
730 MPa
Tensile Strength: Yield (Proof)
430 MPa
Hardness
Brinell Hardness
220
Physical
Density
7.6 g/cm 3
Thermal
Latent Heat of Fusion
290 J/g
Maximum Temperature: Corrosion
390 °C
Maximum Temperature: Mechanical
840 °C
Melting Completion (Liquidus)
1420 °C
Melting Onset (Solidus)
1380 °C
Specific Heat Capacity
490 J/kg-K
Thermal Conductivity
23 W/m-K
Thermal Diffusivity
6.2 mm 2 /s
Thermal Expansion
10 µm/m-K
Thermal Shock Resistance
27 points
Electrical
Electrical Conductivity: Equal Volume
2.4 % IACS
Electrical Conductivity: Equal Weight (Specific)
2.8 % IACS
Calculated
PREN (Pitting Resistance)
19
Resilience: Ultimate (Unit Rupture Work)
120 MJ/m 3
Resilience: Unit (Modulus of Resilience)
470 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
27 points
Strength to Weight: Bending
24 points
Environmental
Base Metal Price
8.5 % relative
Embodied Carbon
2.8 kg CO 2 /kg material
Embodied Energy
42 MJ/kg
Embodied Energy
42 MJ/kg 18 x 10 3 BTU/lb
Embodied Water
120 L/kg
Embodied Water
120 L/kg 14 gal/lb
Registered Designations & Aliases
1.4150EN 1.4150 (X53CrSiMoVN16-2) Stainless SteelX53CrSiMoVN16-2
Standards
EN 10088-1 EN 10088-1: Stainless steels - Part 1: List of stainless steels
EN 10088-3 EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-3 EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10088-1: Stainless steels - Part 1: List of stainless steels Properties and Selection: Irons, Steels and High Performance Alloys, ASM Handbook vol. 1, ASM International, 1993 Corrosion of Stainless Steels, A. John Sedriks, 1996