POOSHESH STEELPERGAS
فا

Nickel Alloy 601 (N06601, NA49)

Nickel Alloys

annealed
OverviewChemical CompositionMechanical PropertiesPhysical PropertiesOther Properties

Property Overview

Density8.3g/cm³
Elastic Modulus200GPa
Tensile Strength660MPa
Yield Strength290MPa
Brinell HardnessUnknown
Maximum Service Temperature1100°C
Weight Calculator

Chemical Composition

C
0 to 0.1%
CR
21 to 25%
NI
58 to 63%
MN
0 to 1.0%
SI
0 to 0.5%
S
0 to 0.015%
CU
0 to 1.0%
AL
1.0 to 1.7%
FE
7.7 to 20%

Mechanical

Elastic (Young's, Tensile) Modulus
200 GPa
Elongation at Break
38 %
Fatigue Strength
220 MPa
Poisson's Ratio
0.28
Shear Modulus
76 GPa
Shear Strength
440 MPa
Tensile Strength: Ultimate (UTS)
660 MPa
Tensile Strength: Yield (Proof)
290 MPa

Physical

Density
8.3 g/cm 3

Thermal

Curie Temperature
-200 °C
Latent Heat of Fusion
320 J/g
Maximum Temperature: Mechanical
1100 °C
Melting Completion (Liquidus)
1410 °C
Melting Onset (Solidus)
1360 °C
Specific Heat Capacity
470 J/kg-K
Thermal Conductivity
11 W/m-K
Thermal Diffusivity
2.8 mm 2 /s
Thermal Expansion
14 µm/m-K
Thermal Shock Resistance
17 points

Electrical

Electrical Conductivity: Equal Volume
1.5 % IACS
Electrical Conductivity: Equal Weight (Specific)
1.6 % IACS

Calculated

Resilience: Ultimate (Unit Rupture Work)
200 MJ/m 3
Resilience: Unit (Modulus of Resilience)
210 kJ/m 3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
23 points
Strength to Weight: Axial
22 points
Strength to Weight: Bending
20 points

Environmental

Base Metal Price
49 % relative
Embodied Carbon
8.0 kg CO 2 /kg material
Embodied Energy
110 MJ/kg
Embodied Energy
110 MJ/kg 49 x 10 3 BTU/lb
Embodied Water
280 L/kg
Embodied Water
280 L/kg 33 gal/lb
Registered Designations & Aliases
N06601NA49Nickel Alloy 601 (N06601, NA49)
Standards

ASTM B166 ASTM B166: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire

ASTM B166 ASTM B166: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire ASTM B167: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube ASTM B168: Standard Specification Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip Microstructure of Superalloys, Madeleine Durand-Charre, 1998 Welding Metallurgy and Weldability of Nickel-Base Alloys, John C. Lippold et al., 2009 Engineering Properties of Nickel and Nickel Alloys, John L. Everhart, 1971 Nickel Alloys, Ulrich Heubner (editor), 1998

ASTM B167 ASTM B167: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube

ASTM B168 ASTM B168: Standard Specification Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip