6110A (AlMg0.9Si0.9MnCu) Aluminum
Wrought Aluminum Alloys
T4
Property Overview
Density2.8g/cm³
Elastic Modulus70GPa
Tensile Strength360MPa
Yield Strength250MPa
Brinell HardnessUnknown
Maximum Service Temperature190°C
Chemical Composition
CR
0.050 to 0.25%
MN
0.3 to 0.9%
SI
0.7 to 1.1%
CU
0.3 to 0.8%
TI
0 to 0.2%
AL
94.8 to 98%
MG
0.7 to 1.1%
RES.
Residuals res. | | 0 to 0.15%
RESIDUALS RES.
0 to 0.15%
ZN
0 to 0.2%
ZR
0 to 0.2%
FE
0 to 0.5%
Mechanical
Elastic (Young's, Tensile) Modulus
70 GPa
Elongation at Break
18 %
Fatigue Strength
140 MPa
Poisson's Ratio
0.33
Shear Modulus
26 GPa
Shear Strength
220 MPa
Tensile Strength: Ultimate (UTS)
360 MPa
Tensile Strength: Yield (Proof)
250 MPa
Physical
Density
2.8 g/cm 3
Thermal
Latent Heat of Fusion
410 J/g
Maximum Temperature: Mechanical
190 °C
Melting Completion (Liquidus)
650 °C
Melting Onset (Solidus)
600 °C
Specific Heat Capacity
900 J/kg-K
Thermal Conductivity
160 W/m-K
Thermal Diffusivity
65 mm 2 /s
Thermal Expansion
23 µm/m-K
Thermal Shock Resistance
16 points
Electrical
Electrical Conductivity: Equal Volume
42 % IACS
Electrical Conductivity: Equal Weight (Specific)
140 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
58 MJ/m 3
Resilience: Unit (Modulus of Resilience)
450 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
50 points
Strength to Weight: Axial
36 points
Strength to Weight: Bending
41 points
Environmental
Base Metal Price
9.5 % relative
Embodied Carbon
8.4 kg CO 2 /kg material
Embodied Energy
150 MJ/kg
Embodied Energy
150 MJ/kg 66 x 10 3 BTU/lb
Embodied Water
1170 L/kg
Embodied Water
1170 L/kg 140 gal/lb
Registered Designations & Aliases
6110A (AlMg0.9Si0.9MnCu) AluminumAlMg0.9Si0.9MnCu
Standards
EN 573-3 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
EN 755-2 EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties