SAE-AISI 1211 (G12110) Carbon Steel
Carbon & Non-Alloy Steels
hot worked
Property Overview
Density7.9g/cm³
Elastic Modulus190GPa
Tensile Strength430MPa
Yield Strength260MPa
Brinell Hardness140HB
Maximum Service Temperature400°C
Chemical Composition
C
0 to 0.13%
MN
0.6 to 0.9%
P
0.070 to 0.12%
S
0.1 to 0.15%
FE
98.7 to 99.23%
Mechanical
Elastic (Young's, Tensile) Modulus
190 GPa
Elongation at Break
29 %
Fatigue Strength
200 MPa
Poisson's Ratio
0.29
Reduction in Area
50 %
Shear Modulus
73 GPa
Shear Strength
280 MPa
Tensile Strength: Ultimate (UTS)
430 MPa
Tensile Strength: Yield (Proof)
260 MPa
Hardness
Brinell Hardness
140
Physical
Density
7.9 g/cm 3
Thermal
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
400 °C
Melting Completion (Liquidus)
1460 °C
Melting Onset (Solidus)
1420 °C
Specific Heat Capacity
470 J/kg-K
Thermal Conductivity
52 W/m-K
Thermal Diffusivity
14 mm 2 /s
Thermal Expansion
12 µm/m-K
Thermal Shock Resistance
14 points
Electrical
Electrical Conductivity: Equal Volume
7.0 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.0 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
110 MJ/m 3
Resilience: Unit (Modulus of Resilience)
180 kJ/m 3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
15 points
Strength to Weight: Bending
16 points
Environmental
Base Metal Price
1.8 % relative
Embodied Carbon
1.4 kg CO 2 /kg material
Embodied Energy
18 MJ/kg
Embodied Energy
18 MJ/kg 7.8 x 10 3 BTU/lb
Embodied Water
46 L/kg
Embodied Water
46 L/kg 5.5 gal/lb
Registered Designations & Aliases
G12110SAE-AISI 1211 (G12110) Carbon Steel
Standards
ASTM A29 ASTM A29: Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ASTM A29 ASTM A29: Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for Properties and Selection: Irons, Steels and High Performance Alloys, ASM Handbook vol. 1, ASM International, 1993