EN 1.4596 (X1CrNiMoAlTi12-10-2) Stainless Steel
Precipitation-Hardening Stainless Steels
solution annealed (AT)
Property Overview
Density7.9g/cm³
Elastic Modulus200GPa
Tensile Strength1030MPa
Yield StrengthUnknown
Brinell Hardness320HB
Maximum Service Temperature790°C
Chemical Composition
C
0 to 0.015%
CR
11.5 to 12.5%
NI
9.2 to 10.2%
MO
1.9 to 2.2%
MN
0 to 0.1%
SI
0 to 0.1%
N
0 to 0.020%
P
0 to 0.010%
S
0 to 0.0050%
TI
0.28 to 0.4%
AL
0.8 to 1.1%
FE
73.4 to 76.4%
Mechanical
Elastic (Young's, Tensile) Modulus
200 GPa
Poisson's Ratio
0.28
Shear Modulus
76 GPa
Tensile Strength: Ultimate (UTS)
1030 MPa
Hardness
Brinell Hardness
320
Physical
Density
7.9 g/cm 3
Thermal
Latent Heat of Fusion
280 J/g
Maximum Temperature: Corrosion
450 °C
Maximum Temperature: Mechanical
790 °C
Melting Completion (Liquidus)
1450 °C
Melting Onset (Solidus)
1410 °C
Specific Heat Capacity
470 J/kg-K
Thermal Expansion
11 µm/m-K
Thermal Shock Resistance
35 points
Calculated
PREN (Pitting Resistance)
19
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
36 points
Strength to Weight: Bending
29 points
Environmental
Base Metal Price
15 % relative
Embodied Carbon
3.5 kg CO 2 /kg material
Embodied Energy
48 MJ/kg
Embodied Energy
48 MJ/kg 20 x 10 3 BTU/lb
Embodied Water
130 L/kg
Embodied Water
130 L/kg 16 gal/lb
Registered Designations & Aliases
1.45961.4596EN 1.4596 (X1CrNiMoAlTi12-10-2) Stainless SteelX1CrNiMoAlTi12-10-2X1CrNiMoAlTi12-10-2
Standards
EN 10088-1 EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-1 EN 10088-1: Stainless steels - Part 1: List of stainless steels
EN 10088-3 EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-3 EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes