5657 (Al99.85Mg1(A), A95657) Aluminum
Wrought Aluminum Alloys
H25
Property Overview
Density2.7g/cm³
Elastic Modulus68GPa
Tensile Strength160MPa
Yield Strength140MPa
Brinell Hardness40HB
Maximum Service Temperature180°C
Chemical Composition
MN
0 to 0.030%
SI
0 to 0.080%
CU
0 to 0.1%
V
0 to 0.050%
AL
98.5 to 99.4%
GA
0 to 0.030%
MG
0.6 to 1.0%
RES.
Residuals res. | | 0 to 0.050%
RESIDUALS RES.
0 to 0.050%
ZN
0 to 0.050%
FE
0 to 0.1%
Mechanical
Elastic (Young's, Tensile) Modulus
68 GPa
Elongation at Break
11 %
Fatigue Strength
85 MPa
Poisson's Ratio
0.33
Shear Modulus
26 GPa
Shear Strength
95 MPa
Tensile Strength: Ultimate (UTS)
160 MPa
Tensile Strength: Yield (Proof)
140 MPa
Hardness
Brinell Hardness
40
Physical
Density
2.7 g/cm 3
Thermal
Latent Heat of Fusion
400 J/g
Maximum Temperature: Mechanical
180 °C
Melting Completion (Liquidus)
660 °C
Melting Onset (Solidus)
640 °C
Specific Heat Capacity
900 J/kg-K
Thermal Conductivity
210 W/m-K
Thermal Diffusivity
84 mm 2 /s
Thermal Expansion
24 µm/m-K
Thermal Shock Resistance
7.1 points
Electrical
Electrical Conductivity: Equal Volume
54 % IACS
Electrical Conductivity: Equal Weight (Specific)
180 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
17 MJ/m 3
Resilience: Unit (Modulus of Resilience)
140 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
50 points
Strength to Weight: Axial
17 points
Strength to Weight: Bending
24 points
Environmental
Base Metal Price
9.5 % relative
Embodied Carbon
8.4 kg CO 2 /kg material
Embodied Energy
160 MJ/kg
Embodied Energy
160 MJ/kg 67 x 10 3 BTU/lb
Embodied Water
1200 L/kg
Embodied Water
1200 L/kg 140 gal/lb
Registered Designations & Aliases
5657 (Al99.85Mg1(A), A95657) AluminumA95657Al99.85Mg1(AEN AW-5657
Standards
ASTM B209 ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B209 ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate Aluminum Standards and Data, Aluminum Association Inc., 2013 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993
EN 573-3 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products