EN 1.0116 (S235J2G3) Non-Alloy Steel
Other Steels
Property Overview
Density7.8g/cm³
Elastic Modulus190GPa
Tensile Strength340MPa
Yield Strength215MPa
Brinell Hardness110HB
Maximum Service Temperature400°C
Chemical Composition
C
0 to 0.17%
CR
0 to 0.3%
NI
0 to 0.3%
MO
0 to 0.080%
MN
0 to 1.4%
SI
0 to 0.55%
P
0 to 0.035%
S
0 to 0.035%
FE
97.1 to 100%
Mechanical
A - Min. elongation at fracture (%) longitud., (+N)
24
+N
A - Min. elongation at fracture (%) longitud., (+N)
23
+N
A - Min. elongation at fracture (%) transverse, (+N)
17
+N
A - Min. elongation at fracture (%) transverse, (+N)
23
+N
Elastic (Young's, Tensile) Modulus
190 GPa
Elongation at Break
23 %
Fatigue Strength
140 MPa
Impact Strength: V-Notched Charpy
28 J
Poisson's Ratio
0.29
Re - Upper yield strength (MPa) (+N)
215
+N
Re - Upper yield strength (MPa) (+N)
175
+N
Re - Upper yield strength (MPa) (+N)
165
+N
Rm - Tensile strength (MPa) (+N)
340
+N
Shear Modulus
73 GPa
Shear Strength
240 MPa
Tensile Strength: Ultimate (UTS)
380 MPa
Tensile Strength: Yield (Proof)
200 MPa
Hardness
Brinell Hardness
110
Physical
Density
7.8 g/cm 3
Thermal
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
400 °C
Melting Completion (Liquidus)
1460 °C
Melting Onset (Solidus)
1420 °C
Specific Heat Capacity
470 J/kg-K
Thermal Conductivity
49 W/m-K
Thermal Diffusivity
13 mm 2 /s
Thermal Expansion
12 µm/m-K
Thermal Shock Resistance
12 points
Electrical
Electrical Conductivity: Equal Volume
7.2 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.3 % IACS
Other
Nominal thickness (mm):
to 100
Nominal thickness (mm):
100 - 250
Nominal thickness (mm):
250 - 500
Calculated
Resilience: Ultimate (Unit Rupture Work)
72 MJ/m 3
Resilience: Unit (Modulus of Resilience)
110 kJ/m 3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
13 points
Strength to Weight: Bending
15 points
Environmental
Base Metal Price
2.0 % relative
Embodied Carbon
1.4 kg CO 2 /kg material
Embodied Energy
19 MJ/kg
Embodied Energy
19 MJ/kg 8.1 x 10 3 BTU/lb
Embodied Water
47 L/kg
Embodied Water
47 L/kg 5.6 gal/lb
Registered Designations & Aliases
1.01161.0116EN 1.0116 (S235J2G3) Non-Alloy SteelS235J2G3S235J2G3
Standards
EN 10250-2 EN 10250-2: 2000 Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
EN 10250-2 EN 10250-2: Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels