EN 1.4833 (X12CrNi23-13) Stainless Steel
Other Steels
Property Overview
Density7.8g/cm³
Elastic Modulus200GPa
Tensile Strength600MPa
Yield Strength210MPa
Brinell Hardness192HB
Maximum Service Temperature1000°C
Chemical Composition
C
0 to 0.15%
CR
22 to 24%
NI
12 to 14%
MN
0 to 2.0%
SI
0 to 1.0%
N
0 to 0.1%
P
0 to 0.045%
S
0 to 0.015%
FE
58.7 to 66%
Mechanical
A - Min. elongation at fracture (%) (+AT)
33-35
+AT
Elastic (Young's, Tensile) Modulus
200 GPa
Elongation at Break
38 %
Fatigue Strength
200 MPa
Poisson's Ratio
0.27
R p0.2 0.2% proof strength (MPa) (+AT)
210
+AT
Rm - Tensile strength (MPa) (+AT)
500-700
+AT
Shear Modulus
78 GPa
Shear Strength
410 MPa
Tensile Strength: Ultimate (UTS)
600 MPa
Tensile Strength: Yield (Proof)
240 MPa
Hardness
Brinell Hardness
170
Brinell hardness (HB): (+AT)
192
+AT
Physical
Density
7.8 g/cm 3
Thermal
Latent Heat of Fusion
300 J/g
Maximum Temperature: Corrosion
440 °C
Maximum Temperature: Mechanical
1000 °C
Melting Completion (Liquidus)
1410 °C
Melting Onset (Solidus)
1370 °C
Specific Heat Capacity
480 J/kg-K
Thermal Conductivity
15 W/m-K
Thermal Diffusivity
4.0 mm 2 /s
Thermal Expansion
16 µm/m-K
Thermal Shock Resistance
13 points
Electrical
Electrical Conductivity: Equal Volume
2.2 % IACS
Electrical Conductivity: Equal Weight (Specific)
2.6 % IACS
Calculated
PREN (Pitting Resistance)
24
Resilience: Ultimate (Unit Rupture Work)
180 MJ/m 3
Resilience: Unit (Modulus of Resilience)
140 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
21 points
Strength to Weight: Bending
20 points
Environmental
Base Metal Price
19 % relative
Embodied Carbon
3.5 kg CO 2 /kg material
Embodied Energy
50 MJ/kg
Embodied Energy
50 MJ/kg 22 x 10 3 BTU/lb
Embodied Water
170 L/kg
Embodied Water
170 L/kg 20 gal/lb
Registered Designations & Aliases
1.48331.4833EN 1.4833 (X12CrNi23-13) Stainless SteelX12CrNi23-13X12CrNi23-13
Standards
EN 10088-1 EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-1 EN 10088-1: Stainless steels - Part 1: List of stainless steels
EN 10095 EN 10095: 1999 Heat Resisting Steels and Nickel Alloys
EN 10095 EN 10095: Heat resisting steels and nickel alloys
EN 10095 EN 10095: Heat resisting steels and nickel alloys EN 10088-1: Stainless steels - Part 1: List of stainless steels
EN 10296-2 EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10297-2 EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions