EN 1.4567 (X3CrNiCu18-9-4) Stainless Steel

Austenitic & General Stainless Steels

Material conditionsolution annealed (AT)

Overview Chemical Composition Mechanical Properties Physical Properties Other Properties

Property Overview

Density7.8g/cm³

Elastic Modulus190GPa

Tensile Strength550MPa

Yield Strength200MPa

Brinell Hardness190HB

Maximum Service Temperature930°C

Weight Calculator

Chemical Composition

0 to 0.040%

17 to 19%

8.5 to 10.5%

0 to 2.0%

0 to 1.0%

0 to 0.1%

0 to 0.045%

0 to 0.015%

3.0 to 4.0%

63.3 to 71.5%

Mechanical

Elastic (Young's, Tensile) Modulus

190 GPa

Elongation at Break

51 %

Fatigue Strength

190 MPa

Impact Strength: V-Notched Charpy

110 J

Poisson's Ratio

0.28

Shear Modulus

76 GPa

Shear Strength

390 MPa

Tensile Strength: Ultimate (UTS)

550 MPa

Tensile Strength: Yield (Proof)

200 MPa

Hardness

Brinell Hardness

190

Physical

Density

7.8 g/cm 3

Thermal

Latent Heat of Fusion

290 J/g

Maximum Temperature: Corrosion

420 °C

Maximum Temperature: Mechanical

930 °C

Melting Completion (Liquidus)

1410 °C

Melting Onset (Solidus)

1370 °C

Specific Heat Capacity

480 J/kg-K

Thermal Conductivity

11 W/m-K

Thermal Diffusivity

3.0 mm 2 /s

Thermal Expansion

17 µm/m-K

Thermal Shock Resistance

12 points

Electrical

Electrical Conductivity: Equal Volume

2.4 % IACS

Electrical Conductivity: Equal Weight (Specific)

2.7 % IACS

Calculated

PREN (Pitting Resistance)

Resilience: Ultimate (Unit Rupture Work)

220 MJ/m 3

Resilience: Unit (Modulus of Resilience)

100 kJ/m 3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

25 points

Strength to Weight: Axial

19 points

Strength to Weight: Bending

19 points

Environmental

Base Metal Price

16 % relative

Embodied Carbon

3.1 kg CO 2 /kg material

Embodied Energy

43 MJ/kg

Embodied Energy

43 MJ/kg 19 x 10 3 BTU/lb

Embodied Water

150 L/kg

Embodied Water

150 L/kg 18 gal/lb

Registered Designations & Aliases

1.45671.4567EN 1.4567 (X3CrNiCu18-9-4) Stainless SteelX3CrNiCu18-9-4X3CrNiCu18-9-4

Standards

EN 10088-1 EN 10088-1: 2005 Stainless steels. List of stainless steels

EN 10088-1 EN 10088-1: Stainless steels - Part 1: List of stainless steels

EN 10088-3 EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10088-3 EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10088-5 EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

EN 10263-5 EN 10263-5: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels

EN 10269 EN 10269: 1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

EN 10269 EN 10269: Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

EN 10269 EN 10269: Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10088-1: Stainless steels - Part 1: List of stainless steels