5010 (AlMg0.5Mn, A95010) Aluminum
Wrought Aluminum Alloys
annealed
Property Overview
Density2.7g/cm³
Elastic Modulus69GPa
Tensile Strength110MPa
Yield Strength40MPa
Brinell Hardness27HB
Maximum Service Temperature180°C
Chemical Composition
CR
0 to 0.15%
MN
0.1 to 0.3%
SI
0 to 0.4%
CU
0 to 0.25%
TI
0 to 0.1%
AL
97.1 to 99.7%
MG
0.2 to 0.6%
RES.
Residuals res. | | 0 to 0.15%
RESIDUALS RES.
0 to 0.15%
ZN
0 to 0.3%
FE
0 to 0.7%
Mechanical
Elastic (Young's, Tensile) Modulus
69 GPa
Elongation at Break
19 %
Fatigue Strength
42 MPa
Poisson's Ratio
0.33
Shear Modulus
26 GPa
Shear Strength
70 MPa
Tensile Strength: Ultimate (UTS)
110 MPa
Tensile Strength: Yield (Proof)
40 MPa
Hardness
Brinell Hardness
27
Physical
Density
2.7 g/cm 3
Thermal
Latent Heat of Fusion
400 J/g
Maximum Temperature: Mechanical
180 °C
Melting Completion (Liquidus)
650 °C
Melting Onset (Solidus)
630 °C
Specific Heat Capacity
900 J/kg-K
Thermal Conductivity
200 W/m-K
Thermal Diffusivity
82 mm 2 /s
Thermal Expansion
23 µm/m-K
Thermal Shock Resistance
5.0 points
Electrical
Electrical Conductivity: Equal Volume
45 % IACS
Electrical Conductivity: Equal Weight (Specific)
150 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
17 MJ/m 3
Resilience: Unit (Modulus of Resilience)
11 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
50 points
Strength to Weight: Axial
11 points
Strength to Weight: Bending
19 points
Environmental
Base Metal Price
9.5 % relative
Embodied Carbon
8.2 kg CO 2 /kg material
Embodied Energy
150 MJ/kg
Embodied Energy
150 MJ/kg 66 x 10 3 BTU/lb
Embodied Water
1190 L/kg
Embodied Water
1190 L/kg 140 gal/lb
Registered Designations & Aliases
5010 (AlMg0.5Mn, A95010) AluminumA95010AlMg0.5MnEN AW-5010
Standards
ASTM B209 ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
EN 485-2 EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 573-3 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
ISO 6361-2 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties