4007 (AlSi1.5Mn) Aluminum
Wrought Aluminum Alloys
annealed
Property Overview
Density2.8g/cm³
Elastic Modulus71GPa
Tensile Strength130MPa
Yield Strength50MPa
Brinell Hardness32HB
Maximum Service Temperature170°C
Chemical Composition
CR
0.050 to 0.25%
NI
0.15 to 0.7%
MN
0.8 to 1.5%
SI
1.0 to 1.7%
CU
0 to 0.2%
TI
0 to 0.1%
AL
94.1 to 97.6%
CO
0 to 0.050%
MG
0 to 0.2%
RES.
Residuals res. | | 0 to 0.15%
RESIDUALS RES.
0 to 0.15%
ZN
0 to 0.1%
FE
0.4 to 1.0%
Mechanical
Elastic (Young's, Tensile) Modulus
71 GPa
Elongation at Break
23 %
Fatigue Strength
56 MPa
Poisson's Ratio
0.33
Shear Modulus
27 GPa
Shear Strength
80 MPa
Tensile Strength: Ultimate (UTS)
130 MPa
Tensile Strength: Yield (Proof)
50 MPa
Hardness
Brinell Hardness
32
Physical
Density
2.8 g/cm 3
Thermal
Latent Heat of Fusion
410 J/g
Maximum Temperature: Mechanical
170 °C
Melting Completion (Liquidus)
650 °C
Melting Onset (Solidus)
590 °C
Specific Heat Capacity
890 J/kg-K
Thermal Conductivity
170 W/m-K
Thermal Diffusivity
67 mm 2 /s
Thermal Expansion
23 µm/m-K
Thermal Shock Resistance
5.5 points
Electrical
Electrical Conductivity: Equal Volume
42 % IACS
Electrical Conductivity: Equal Weight (Specific)
140 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
23 MJ/m 3
Resilience: Unit (Modulus of Resilience)
18 kJ/m 3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
49 points
Strength to Weight: Axial
12 points
Strength to Weight: Bending
20 points
Environmental
Base Metal Price
9.5 % relative
Embodied Carbon
8.1 kg CO 2 /kg material
Embodied Energy
150 MJ/kg
Embodied Energy
150 MJ/kg 65 x 10 3 BTU/lb
Embodied Water
1160 L/kg
Embodied Water
1160 L/kg 140 gal/lb
Registered Designations & Aliases
4007 (AlSi1.5Mn) AluminumA94007AlSi1.5MnEN AW-4007
Standards
EN 485-2 EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 573-3 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
ISO 6361-2 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties