2017 (AlCu4MgSi, A92017) Aluminum
Wrought Aluminum Alloys
annealed
Property Overview
Density3g/cm³
Elastic Modulus71GPa
Tensile Strength190MPa
Yield Strength76MPa
Brinell Hardness45HB
Maximum Service Temperature190°C
Chemical Composition
CR
0 to 0.1%
MN
0.4 to 1.0%
SI
0.2 to 0.8%
CU
3.5 to 4.5%
TI
0 to 0.15%
AL
91.6 to 95.5%
MG
0.4 to 0.8%
RES.
Residuals res. | | 0 to 0.15%
RESIDUALS RES.
0 to 0.15%
ZN
0 to 0.25%
FE
0 to 0.7%
Mechanical
Elastic (Young's, Tensile) Modulus
71 GPa
Elongation at Break
16 %
Fatigue Strength
90 MPa
Poisson's Ratio
0.33
Shear Modulus
27 GPa
Shear Strength
130 MPa
Tensile Strength: Ultimate (UTS)
190 MPa
Tensile Strength: Yield (Proof)
76 MPa
Hardness
Brinell Hardness
45
Physical
Density
3.0 g/cm 3
Thermal
Latent Heat of Fusion
390 J/g
Maximum Temperature: Mechanical
190 °C
Melting Completion (Liquidus)
640 °C
Melting Onset (Solidus)
510 °C
Specific Heat Capacity
880 J/kg-K
Thermal Conductivity
150 W/m-K
Thermal Diffusivity
56 mm 2 /s
Thermal Expansion
24 µm/m-K
Thermal Shock Resistance
7.9 points
Electrical
Electrical Conductivity: Equal Volume
38 % IACS
Electrical Conductivity: Equal Weight (Specific)
110 % IACS
Calculated
Resilience: Ultimate (Unit Rupture Work)
24 MJ/m 3
Resilience: Unit (Modulus of Resilience)
41 kJ/m 3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
46 points
Strength to Weight: Axial
17 points
Strength to Weight: Bending
24 points
Environmental
Base Metal Price
10 % relative
Embodied Carbon
8.0 kg CO 2 /kg material
Embodied Energy
150 MJ/kg
Embodied Energy
150 MJ/kg 64 x 10 3 BTU/lb
Embodied Water
1140 L/kg
Embodied Water
1140 L/kg 140 gal/lb
Registered Designations & Aliases
2017 (AlCu4MgSi, A92017) AluminumA92017AlCu4MgSiEN AW-2017
Standards
ASTM B211 ASTM B211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B211 ASTM B211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire Aerospace Materials, Brian Cantor et al. (editors), 2001 Aluminum Standards and Data, Aluminum Association Inc., 2013 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993
ISO 6361-2 ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties