SAE-AISI O1 (T31501) Oil-Hardening Steel
Tool Steels
Property Overview
Density7.8g/cm³
Elastic Modulus190GPa
Tensile Strength640 to 2060MPa
Yield StrengthUnknown
Brinell HardnessUnknown
Maximum Service TemperatureUnknown
Chemical Composition
C
0.85 to 1.0%
CR
0.4 to 0.6%
NI
0 to 0.3%
MN
1.0 to 1.4%
SI
0 to 0.5%
P
0 to 0.030%
S
0 to 0.030%
CU
0 to 0.25%
V
0 to 0.3%
W
0.4 to 0.6%
FE
95 to 97.4%
Mechanical
Elastic (Young's, Tensile) Modulus
190 GPa
Poisson's Ratio
0.29
Shear Modulus
72 GPa
Tensile Strength: Ultimate (UTS)
640 to 2060 MPa
Physical
Density
7.8 g/cm 3
Thermal
Latent Heat of Fusion
250 J/g
Melting Completion (Liquidus)
1460 °C
Melting Onset (Solidus)
1420 °C
Specific Heat Capacity
470 J/kg-K
Thermal Conductivity
43 W/m-K
Thermal Diffusivity
12 mm 2 /s
Thermal Expansion
12 µm/m-K
Thermal Shock Resistance
21 to 68 points
Electrical
Electrical Conductivity: Equal Volume
7.4 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.5 % IACS
Calculated
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
23 to 73 points
Strength to Weight: Bending
21 to 46 points
Environmental
Base Metal Price
3.4 % relative
Embodied Carbon
1.9 kg CO 2 /kg material
Embodied Energy
27 MJ/kg
Embodied Energy
27 MJ/kg 12 x 10 3 BTU/lb
Embodied Water
51 L/kg
Embodied Water
51 L/kg 6.1 gal/lb
Registered Designations & Aliases
SAE-AISI O1 (T31501) Oil-Hardening SteelT31501
Standards
ASTM A681 ASTM A681: Standard Specification for Tool Steels Alloy
SAE J437 SAE J437: Selection and Heat Treatment of Tool and Die Steels
SAE J437 SAE J437: Selection and Heat Treatment of Tool and Die Steels ASTM A681: Standard Specification for Tool Steels Alloy Tool Steels, 5th ed., George Roberts et al., 1998 Tool Steels: Properties and Performance, Rafael A. Mesquita (editor), 2016