1350 (E-Al99.5, EC, 3.0257, 1E, A91350) Aluminum

Wrought Aluminum Alloys

Material conditionannealed

Overview Chemical Composition Mechanical Properties Physical Properties Other Properties

Property Overview

Density2.7g/cm³

Elastic Modulus68GPa

Tensile Strength78MPa

Yield Strength29MPa

Brinell Hardness20HB

Maximum Service Temperature170°C

Weight Calculator

Chemical Composition

0 to 0.010%

0 to 0.1%

0 to 0.050%

0 to 0.020%

99.5 to 100%

0 to 0.050%

0 to 0.030%

RES.

Residuals res. | | 0 to 0.1%

RESIDUALS RES.

0 to 0.1%

0 to 0.050%

0 to 0.4%

Mechanical

Elastic (Young's, Tensile) Modulus

68 GPa

Elongation at Break

23 %

Fatigue Strength

25 MPa

Poisson's Ratio

0.33

Shear Modulus

26 GPa

Shear Strength

55 MPa

Tensile Strength: Ultimate (UTS)

78 MPa

Tensile Strength: Yield (Proof)

29 MPa

Hardness

Brinell Hardness

Physical

Density

2.7 g/cm 3

Thermal

Latent Heat of Fusion

400 J/g

Maximum Temperature: Mechanical

170 °C

Melting Completion (Liquidus)

660 °C

Melting Onset (Solidus)

650 °C

Specific Heat Capacity

900 J/kg-K

Thermal Conductivity

230 W/m-K

Thermal Diffusivity

96 mm 2 /s

Thermal Expansion

24 µm/m-K

Thermal Shock Resistance

3.5 points

Electrical

Electrical Conductivity: Equal Volume

62 % IACS

Electrical Conductivity: Equal Weight (Specific)

210 % IACS

Calculated

Resilience: Ultimate (Unit Rupture Work)

14 MJ/m 3

Resilience: Unit (Modulus of Resilience)

6.3 kJ/m 3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

50 points

Strength to Weight: Axial

8.0 points

Strength to Weight: Bending

15 points

Environmental

Base Metal Price

9.5 % relative

Embodied Carbon

8.3 kg CO 2 /kg material

Embodied Energy

160 MJ/kg

Embodied Energy

160 MJ/kg 67 x 10 3 BTU/lb

Embodied Water

1200 L/kg

Embodied Water

1200 L/kg 140 gal/lb

Physical Other

Calomel Potential

-740 mV

Registered Designations & Aliases

1350 (E-Al99.5, EC, 3.0257, 1E, A91350) Aluminum1E3.0257A91350E-Al99.5ECEN AW-1350

Standards

ASTM B230 ASTM B230: Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes

ASTM B233 ASTM B233: Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

ASTM B236 ASTM B236: Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

ASTM B236 ASTM B236: Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) ASTM B609: Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes ASTM B230: Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes ASTM B233: Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes Handbook of Aluminum Bonding Technology and Data, J. D. Minford, 1993 EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties Aluminum Standards and Data, Aluminum Association Inc., 2013 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993

ASTM B609 ASTM B609: Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

EN 485-2 EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties

EN 573-3 EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products

EN 755-2 EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties